Table of Contents
Advertisement
Syntax
remote-port port
Parameters
port
Guidelines
This command only sets the remote TCP port for the Stateful Raw XML Handler.
Use the remote-address command to set the remote IP address.
Related Commands
local-address, port, remote-address
Examples
v Binds the current Stateful Raw XML Handler to the specified remote port.
ssl
Assigns an SSL Proxy Profile.
Syntax
ssl name
no ssl
Parameters
name
Guidelines
The SSL Proxy Profile identified here must already exist in the current application
domain. Use the Global configuration mode command sslproxy to create a new
SSL Proxy Profile.
Use the no ssl command to remove the SSL Proxy Profile assignment.
Examples
v Assigns the SSL-1 SSL Proxy to the current Stateful Raw XML Handler.
v Removes the assignment of the SSL-1 SSL Proxy named from the current Stateful
648
Command Reference
Binds the Stateful Raw XML Handler to a specific port.
# remote-port 16001
#
Specifies the name of the existing SSL Proxy Profile assigned to the Stateful
Raw XML Handler.
# ssl SSL-1
#
Raw XML Handler.
# no ssl
#
Advertisement
Table of Contents
