Table of Contents
Advertisement
Guidelines
Specifies the offset, in hours, of daylight savings time. This is typically 1, meaning
that the clock moves forward or back 1 hour when the time boundary is crossed.
Applies to the timezone that is identified by the name or custom command.
daylight-start-day
Specifies the day of the week when daylight savings time starts.
Syntax
daylight-start-day day
Parameters
day
Guidelines
Applies to the timezone that is identified by the name or custom command.
Related Commands
daylight-start-hours, daylight-start-minutes, daylight-start-month,
daylight-start-week
Examples
v Sets Sunday as the day of the week when daylight savings time starts.
daylight-start-hours
Specifies the hour of the day when daylight savings time starts.
Syntax
daylight-start-hours hours
Parameters
hours
Guidelines
Uses the 24 hour clock. A setting of 2 is 2 AM; a setting of 14 is 2 PM. Applies to
the timezone that is identified by the name or custom command.
680
Command Reference
Specifies the day of the week when daylight savings time starts. Use one of
the following keywords:
v Monday
v Tuesday
v Wednesday
v Thursday
v Friday
v Saturday
v Sunday
# daylight-start-day Sunday
#
Specifies the hour of the day when daylight savings time starts. Use an
integer between 0 and 23.
Advertisement
Table of Contents
