Table of Contents
Advertisement
Related Commands
exec
Examples
v Enters Include Configuration configuration mode to create the
v Deletes the standardServiAceProxies Include Configuration.
input-conversion-map
Enters HTTP Input Conversion Map configuration mode.
Syntax
input-conversion-map name
no input-conversion-map name
Parameters
name
Guidelines
Use the no input-conversion-map command to delete an Input Conversion Map.
Use the cancel or exit command to exit HTTP Input Conversion Map configuration
mode and enter Global configuration mode.
Related Commands
cancel, exit
interface
Enters Interface configuration mode for a specified interface.
Syntax
interface {[ethernet 0 | eth0] | [ethernet 1 | eth1] | [ethernet 2 | eth2] |
[management 0 | mgt0]}
Guidelines
Depending on model type, the appliance provides three or four Ethernet interfaces.
There is one dedicated management port (labelled either MANAGEMENT or MGMT), and
two or three network ports (labelled either ETHERNET or NETWORK).
Use the no interface command to delete an Ethernet interface connections from the
appliance.
50
Command Reference
standardServiAceProxies Include Configuration.
# include-config standardServiceProxies
Include Configuration configuration mode
#
# no include standardServiceProxies
#
Specifies the name of the Input Conversion Map.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Advertisement
Table of Contents
