Table of Contents
Advertisement
Guidelines
In XML Manager configuration mode, you can configure the target manager to
perform a rule-based action.
Use the no xml-manager command to delete an XML Manager.
Related Commands
documentcache, refresh stylesheet, xml parser limits, xml validate, xmlfirewall,
xpath function map
Examples
v Enters XML Manager configuration mode to create the ScheduleHandler XML
v Enters XML Manager configuration mode to modify the ScheduleHandler XML
v Deletes the ScheduleHandler XML manager.
xml-mgmt
Enter XML Management Interface configuration mode or enables or disables the
XML Management Interface.
Syntax
xml-mgmt
xml-mgmt address port
no xml-mgmt
Parameters
address Specifies an IP address that, in conjunction with port, identifies the XML
port
Guidelines
The xml-mgmt command has the following invocations:
v Without arguments to enter XML Management Interface configuration mode.
v With the address and port parameters to enable the XML Management Interface.
v With the no keyword and without arguments to disable the XML Management
142
Command Reference
Manager.
# xml-manager ScheduleHandler
New XML Manager configuration
#
Manager.
# xml-manager ScheduleHandler
Modify XML Manager configuration
#
# no xml-manager ScheduleHandler
xml-manager ScheduleHandler - Configuration deleted.
#
Management Interface. A value of 0.0.0.0 indicates all local addresses.
Identifies the port on the local appliance that monitors SOAP/XML
management traffic. Use an integer in the range of 0 through 65535.
Interface.
Advertisement
Table of Contents
