Table of Contents
Advertisement
Chapter 7. Compact Flash configuration mode (Type 9235)
This chapter provides an alphabetic listing of commands that are available in
Compact Flash configuration mode. To enter this configuration mode, use the
Global compact-flash command.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in Compact Flash configuration mode.
directory
Specifies the name of the directory.
Syntax
directory name
Parameters
name
Guidelines
The directory command specifies the directory under which to make the files on
the compact flash available in the local: and logstore: directories in each
application domain.
Examples
v Makes the files on the compact flash storage card accessible in the
read-only
Sets the files on the compact flash to read-only access.
Syntax
read-only
no read-only
Guidelines
The read-only command sets the files on the compact flash to read-only access.
The default is read-write.
Examples
v Makes the file system read-only.
© Copyright IBM Corp. 1999, 2008
Specifies the name of the subdirectory.
local:///flash and logstore:///flash directories.
# compact-flash cf0
Compact Flash configuration mode
# directory flash
#
185
Advertisement
Table of Contents
