Table of Contents
Advertisement
Chapter 62. Processing Rule configuration mode
This chapter provides an alphabetic listing of commands that are available in
Processing Rule configuration mode.
To enter this configuration mode, use the Global rule command.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in Processing Rule configuration mode.
aaa
Adds an aaa action.
Syntax
aaa input-context name [output-context]
Parameters
input-context
name
output-context
Examples
v Applies the AAA-Policy1 AAA Policy to the original input to the Processing
call
Adds a call action.
Syntax
call input-context rule output-context
Parameters
input-context
rule
© Copyright IBM Corp. 1999, 2008
Identifies the context that contains the document authenticated or
authorized by the AAA policy that is implemented in this Processing Rule.
Specifies the name of an existing AAA Policy.
Optionally identifies the context where any post processing output is
stored. Use OUTPUT to specify the final policy output, that is the
transformed client request or transformed server response.
Rule.
# aaa INPUT AAA-Policy-1
#
Identifies the context in which the specified rule is called. Use INPUT to
specify the initial policy input, that is the original client request or server
response.
Specifies the name of the existing rule to invoke.
559
Advertisement
Table of Contents
