Table of Contents
Advertisement
Related Commands
monitor-count (Global), monitor-service (Global)
Examples
v Assigns the wsgw-duration Duration monitor to the current proxy.
v Removes the wsgw-duration Duration monitor from the current proxy.
v Removes all Duration monitors from the current proxy.
monitor-processing-policy
Sets the behavior when a service has multiple monitors.
Syntax
monitor-processing-policy {terminate-at-first-throttle | terminate-at-first-match}
Parameters
terminate-at-first-throttle
terminate-at-first-match
monitor-service
Assigns or removes a Service Level Monitor.
Syntax
Assigns a Service Level Monitor
Removes a Service Level Monitor
Parameters
name
Guidelines
Service Level Monitors watch Web Services endpoints. A Service Level Monitor
collects statistics, establishes monitors (Count Monitors and Duration Monitors),
and can take action when thresholds are met or exceeded.
Use this command to add or to remove one or more Service Level Monitors.
802
Command Reference
# monitor-duration wsgw-duration
#
# no monitor-duration wsgw-duration
#
# no monitor-duration
#
(Default) Monitors will execute in the order in which they are listed. After
any monitor either shapes (buffers to delay) or rejects a message, no
further monitors will execute.
Monitors will execute in the order in which they are listed. After any
monitor matches a message and takes any action at all, no further monitor
will execute.
monitor-service name
no monitor-service [name]
Specifies the name of a Service Level Monitor.
Advertisement
Table of Contents
