Table of Contents
Advertisement
shutdown
Restarts or shuts down the appliance.
Syntax
shutdown reboot [seconds]
shutdown reload [seconds]
shutdown halt [seconds]
Parameters
reboot Shuts down and restarts the appliance.
reload Restarts the appliance.
halt
seconds
Guidelines
Also available in Flash configuration mode.
The appliance restarts using the startup configuration specified by the boot config
command and the startup firmware image specified by the boot image command.
If a startup configuration or firmware image has not been designated, the
appliance restarts with the configuration and firmware image that were active
when the shutdown command was executed.
Related Commands
boot config, boot image
Examples
v Shuts down and restarts the appliance after 10 seconds.
v Restarts the appliance after 20 seconds.
v Shuts down the appliance after 60 seconds.
summary
Specifies a brief, object-specific comment.
Shuts down the appliance.
Specifies the number of seconds before the appliance starts the shutdown
operation. Use an integer in the range of 0 through 65535. The default is
10.
# shutdown reboot
Reboot in 10 second(s).
#
# shutdown reload 20
Reload in 20 second(s).
#
# shutdown halt 60
Shutdown in 60 second(s).
#
Chapter 1. Initial login and common commands
13
Advertisement
Table of Contents
