Table of Contents
Advertisement
SOAP responses from the server. The Front Side Protocol Handler must be
associated with the same DataPower service where the corresponding Reliable
Messaging sequence is occurring.
This property controls whether the backside Reliable Messaging source uses a
unique URL to receive asynchronous Acks from the server Reliable Messaging
destination, or whether Acks are sent synchronously in future responses to the
backside server.
v With a specified Front Side Protocol Handler and the response process causes a
v Without a Front Side Protocol Handler, the AcksTo element has the value
Related Commands
wsrm
wsrm-source-exponential-backoff
Indicates whether to use the exponential back off.
Syntax
wsrm-source-exponential-backoff {on | off}
Parameters
on
off
Guidelines
The wsrm-source-exponential-backoff command indicates whether to use the
exponential back off to increase the interval between retransmissions on
unacknowledged messages by a Reliable Messaging source.
Related Commands
wsrm, wsrm-destination-accept-offers, wsrm-source-request-create-sequence,
wsrm-source-response-create-sequence, wsrm-source-retransmission-interval
wsrm-source-front-acks-to
Identifies the Front Side Protocol Handler to receive response for the client.
Syntax
wsrm-source-front-acks-to handler
842
Command Reference
CreateSequence SOAP message to be sent, the AcksTo element of the
CreateSequence SOAP message will be set to the URL that is specified in back
AcksTo.
http://www.w3.org/2005/08/addressing/anonymous, which indicates synchronous
Acks.
(Default) Uses the exponential back off to increase the interval between
retransmissions. The value of the wsrm-source-retransmission-interval
command sets with the initial timeout.
Does not use the exponential back off to increase the interval between
retransmissions.
Advertisement
Table of Contents
