Table of Contents
Advertisement
Chapter 59. Processing Action configuration mode
This chapter provides an alphabetic listing of commands that are available in
Processing Action configuration mode.
To enter this configuration mode, use the Global action command. While in this
mode, create a named, reusable processing action.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in this configuration mode.
aaa-policy
Identifies an AAA Policy for the current aaa action.
Syntax
aaa-policy name
Parameters
name
Examples
v Assigns the AAA-Policy1 AAA Policy to the current aaa action.
async-action
Specifies the action for the current event-sink action.
Syntax
async-action action
Parameters
action
Guidelines
The async-action command specifies the name of an asynchronous action that the
current event-sink action should wait for. This command is meaningful only when
the action type specified by the type command is event-sink.
Related Commands
type
© Copyright IBM Corp. 1999, 2008
Specifies the name of the AAA Policy.
# type aaa
# aaa-policy AAA-Policy1
#
Specifies the name of the action to wait for
525
Advertisement
Table of Contents
