Table of Contents
Advertisement
Parameters
name
Guidelines
A monitor count is an incremental, or counter-based, monitor that consists of a
target message class, a configured threshold, and a control procedure that is
triggered when the threshold is exceeded.
Use the cancel or exit command to leave Message Count Monitor configuration
mode and enter Global configuration mode.
Use the no monitor-count command to delete an incremental monitor.
Related Commands
cancel, exit, show message-count-filters
monitor-duration
Enters Message Duration Monitor configuration mode.
Syntax
monitor-duration name
no monitor-duration name
Parameters
name
Guidelines
A duration, or time-based, monitor consists of a target message class, two
thresholds, and a control procedure that is triggered when either threshold is
exceeded.
Use the cancel or exit command to leave Message Duration Monitor configuration
mode and enter Global configuration mode.
Use the no monitor-duration command to delete a duration monitor.
Related Commands
cancel, exit, monitor-action, monitor-count, show message-durations, show
message-duration-filters
move
Moves a file from one directory to another.
Specifies the name of the monitor.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Specifies the name of the duration monitor.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Chapter 2. Global configuration mode
71
Advertisement
Table of Contents
