Fujitsu Eternus DX100 S3 User Manual page 879

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
ED702
ED703
ED704
ED705
ED706
ED707
ED708
ED709
ED70A
ED70B
ED710
ED720
ED721
ED722
ED800
ED801
ED802
ED803
ED804
ED805
Filesystem check is required.
The NAS file system needs to be checked.
Full filesystem check is required.
The NAS file system needs to be completely checked.
The mounting status of the NAS file system is incorrect.
The mounting status of the NAS file system is not normal.
Maintenance of the filesystem is required.
Maintenance of the NAS file system is required.
DNS lookup failure.
The name resolution with the DNS in the NAS failed.
The VLAN setting for the NAS is incorrect.
The VLAN setting for the NAS is incorrect.
The NAS bonding setting is incorrect.
The NAS bonding setting is incorrect.
The network setting for the NAS is incorrect.
The network setting for the NAS is incorrect.
An I/O error occurs in the NAS system.
An I/O error is detected in the NAS system.
The authentication process via the authentication server failed.
The authentication process via the authentication server failed.
An internal error occurs in the NAS system.
An error is detected in the NAS system.
Filesystem check is already running.
The NAS file system is already being checked.
Invalid operation.
The NAS recovery operation cannot be performed.
NAS engine is not started. If SYSVOL does not exist, please make a NAS Volume at first.
NAS engine is not started. If SYSVOL does not exist, please make a NAS Volume at first.
Stack suspend timeout.
A timeout error occurred because monitoring of the Asynchronous Stack mode with the timer is sus-
pended.
Cascade copy session exist.
The cascade destination copy session uses the data in the specified copy session.
Cascade local copy session exist.
An OPC, QuickOPC, SnapOPC, or SnapOPC+ session is set in the cascade destination.
Cascade EC/REC session is not suspended.
The EC/REC in the cascade destination is not in Suspend status.
The pool of specified destination volume is different from other SnapOPC+ generations.
The copy destination LU member pool type or pool number is different in one of the SnapOPC+ genera-
tion groups during SnapOPC+ Start.
Started of advanced copy session which uses TFOV to unsupported volume type.
An Advanced Copy session using TFOV started for an unsupported combination.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
879
P2X0-1210-05ENZ0