Fujitsu Eternus DX100 S3 User Manual page 109

Fujitsu eternus cli user's guide
Hide thumbs Also See for Eternus DX100 S3:
Table of Contents

Advertisement

Chapter 3 Configuration Settings and Display
3.2 Volume Management > show volumes
NAS Volume Format Status
Encryption
Expansion
RG or TPP or FTRP
Size(MB)
Reserved Deletion
Copy Protection
Used Status Usage status for a TPV or an FTV
Measurements
Attention (%)
Balancing Level
Priority
Used Capacity (MB)
EXC
Size on RAID Group
The progress status of the NAS system volume format
(this status is only displayed when the NAS function is enabled. If the volume type is not a NAS
system volume, a hyphen (-) appears.)
Encryption status
The number that configures volume if expanded
RAID group identifiers, Thin Provisioning identifiers, or Flexible Tier Pool identifiers
No.
RAID group number, Thin Provisioning Pool number, or Flexible Tier Pool number
Name
RAID group name, Thin Provisioning Pool name, or Flexible Tier Pool name
Volume size. For SDVs, Virtual-size is displayed.
Reserved deletion sign for SDPV only
Copy protection
Measurements for a TPV or an FTV
Attention level for a TPV or an FTV
Balancing level for TPV only
FTRP number to which the FTV is preferentially allocated
Used capacity for a TPV or an FTV
Indicates whether the EXC (Extreme Cache) function is enabled for each volume.
" - " is displayed for volume types that do not support the EXC function.
The EXC function is not used for a volume regardless of its setting when the EXC function is
disabled for the ETERNUS DX.
Actual capacity that the volume uses in the relevant RAID group. This information appears
when the "-mode detail" parameter, the "-mode wsv" parameter, or the "-mode expansion"
parameter is specified. When the "-mode detail" parameter is specified, this information is not
displayed for LUN concatenated volumes and WSVs. To display the actual capacity that the LUN
concatenated volumes and the WSVs use in each RAID group, specify the "-mode expansion"
parameter or the "-mode wsv" parameter. This information is not displayed for volume types
that are not Open volumes, SDVs, SDPVs, or WSVs.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
109
P2X0-1210-05ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents