Show Disk-Patrol - Fujitsu Eternus DX100 S3 User Manual

Chapter 6 Information Settings and Display
6.4 Utility > show disk-patrol

show disk-patrol

This command displays the disk patrol function settings.
■
Syntax
show disk-patrol
■ Parameter
No parameters.
■ Output
Disk Patrol
■ Example(s)
The following example displays the disk patrol function settings:
CLI> show disk-patrol
Disk Patrol
Indicates whether the disk patrol function is enabled for the ETERNUS DX.
Enable
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
729
P2X0-1210-05ENZ0