Release Reservation - Fujitsu Eternus DX100 S3 User Manual

Chapter 6 Information Settings and Display
6.4 Utility > release reservation

release reservation

This command releases the volumes that have been reserved by host servers (persistent reservation). The
reservation key is also deleted.
■ Syntax
release reservation {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Example(s)
The following example releases the volume named "VOL001" that has been reserved by the host servers:
CLI > release reservation -volume-name VOL001
identifiers #5-#25 that have been reserved by the host servers:
CLI > release reservation -volume-number 5-25
volume_numbers
This parameter specifies the volume identifiers to be released. One or more volumes can be
specified at the same time. For details, refer to
volume_numbers
Volume number
volume_names
Volume name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
| -volume-name
"1.2.10 Volume Syntax" (page
725
volume_names
}
26).
P2X0-1210-05ENZ0