Fujitsu Eternus DX100 S3 User Manual page 754

Chapter 7 NAS Function Setting and Display
7.2 Network Interface > create nas-interface
-connect-ip Optional. This parameter specifies the IPv6 global address or unique local address of the NAS
-subnet-prefix-length
-ipv6-gateway
■ Example(s)
The following example shows the settings for creating a NAS interface with the name NAS_IF#0 and an IPv4
address. The created NAS interface is then assigned to CM#0 CA#0 Port#0.
CLI> create nas-interface -port 000 -ip 192.168.0.100 -netmask 255.255.255.0 -gateway 192.168.0.1
The following example shows the settings for creating a NAS interface with the name NAS_IF#1 and an IPv6
address. The created NAS interface is then assigned to CM#0 CA#0 Port#1.
CLI> create nas-interface -port 001 -link-local-ip fe80::0123:4567:89ab:cdef -connect-ip
2001:db8:20:3:1000:100:20:3 -subnet-prefix-length 64 -ipv6-gateway 2001:db8:20:3:1000:100:20:1
interface.
• An address that conflicts with that of another NAS interface cannot be specified.
• Only a global address or unique local address can be specified.
• The "-subnet-prefix-length" parameter must be set.
ip_address
IPv6 global address or unique local address of the NAS interface
Example: 2001:db8:20:3:1000:100:20:3
Optional. This parameter specifies the subnet prefix length of the NAS interface between 3 and
128.
prefix_length
Subnet prefix length of the NAS interface (3 to 128)
Optional. This parameter specifies the IPv6 gateway address.
• The address of a different subnet cannot be specified.
• A link local address can be specified.
• The "-connect-ip" parameter must be set.
gateway_address
IPv6 gateway address
Example: 2001:db8::1234:0:0:9abc
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
754
P2X0-1210-05ENZ0