Forced Nas-Fsmount - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.10 NAS Function Restoration > forced nas-fsmount

forced nas-fsmount

This command performs a mount of the file system.
■
Syntax
forced nas-fsmount -cm {0|1} {-volume-number
■ Parameter
-cm
-volume-number
or
-volume-name
■ Example(s)
This command mounts NAS TPV#1 in CM#0.
CLI> forced nas-fsmount -cm 0 -volume-number 1
This command mounts NAS_TPV (NAS Backup TPV) in CM#1.
CLI> forced nas-fsmount -cm 1 -volume-name NAS_TPV
This parameter specifies the target controller module.
0 Controller module#0
1 Controller module#1
This parameter specifies the target NAS TPV. Only a single volume can be specified.
• Only NAS TPVs can be specified.
• If the specified volume is mounted, this command terminates with an error.
volume-number
Volume number
volume-name
Volume name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume-number
|-volume-name
812
volume-name
}
P2X0-1210-05ENZ0