Fujitsu Eternus DX100 S3 User Manual page 425

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management
4.1.5.2 Path Information File Syntax (TEXT type)
For CLI-use, a path information file should be created using text editor, or something similar. The TEXT type
path information file description rules are as follows:
■ Basic rules
• Only ASCII characters may be used.
• All label names must be in lowercase. The following is a correct example.
storage 10
The following example has an uppercase label (a syntax error):
STORAGE 10
• Lines 'starting' (first non-space character) with a hash mark (#) are handled as comment lines. The
following example shows a correct comment line:
# definition of storage system
The following line is NOT handled as a comment line because the "box-id" string appears before the hash
mark:
box-id ###DXL###
• The number of space is not restricted. Note that at least one or more space keys are required between a
label name and operand, to set value. The following example is also identified as a correct line.
storage
The following example has no spaces between the "storage" label name and the operand value "10" (a
syntax error):
storage10
• The ASCII characters CR+LF (hexadecimal code 0x0d0a) are expected for line breaks, with CR or LF alone
also being interpreted as a line break. When exporting the system backup path information, line breaks
are output as ASCII code CR+LF.
• The maximum number of characters for each line is 256 (including the line break characters).
■ Authentication strings
• The following fixed string must be described from the first line and 1 column. Any space characters must
not be inserted:
eternus-rec-path-text-0101
■ Storage system definitions
storage
10
Defines an identification number (0-127) for each of the local and remote storage systems.
Usable numbers can be freely selected within this range. The following example uses "0" as
the storage system id number:
storage 0
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
425
P2X0-1210-05ENZ0