Fujitsu Eternus DX100 S3 User Manual page 223

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show fc-parameters
REC Transfer Mode Stack
REC Transfer Mode Consistency
REC Transfer Mode Through
TFO Transfer Mode
WWN Mode
WWPN
Asynchronous stack mode for the REC transfer mode (Enable: enabled, Disable: disabled)
(A hyphen (-) is displayed in the field when the port mode is not the RA mode or the CA/RA
auto mode.)
Asynchronous consistency mode for the REC transfer mode (Enable: enabled, Disable:
disabled)
(A hyphen (-) is displayed in the field when the port mode is not the RA mode or the CA/RA
auto mode.)
Asynchronous through mode for the REC transfer mode (Enable: enabled, Disable: disabled)
(A hyphen (-) is displayed in the field when the port mode is not the RA mode or the CA/RA
auto mode.)
TFO transfer mode (transfer mode of the Storage Cluster) (Enable: enabled, Disable: disabled)
(A hyphen (-) is displayed in the field when the port mode is not the RA mode or the CA/RA
auto mode.)
Indicates whether or not the WWPN/WWNN of the relevant port was changed from the default
setting.
Default WWPN/WWNN has not changed (Default setting)
Custom WWPN/WWNN has been changed
The Port WWN that is set for the relevant port
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
223
P2X0-1210-05ENZ0