Fujitsu Eternus DX100 S3 User Manual page 738

Chapter 7 NAS Function Setting and Display
7.1 Shared Folders > create nas-share
-service
-access
-oplocks
-owner
-group
volume_number
NAS Thin Provisioning Volume number
volume_name
NAS Thin Provisioning Volume name
This parameter specifies the protocol of the file system to be used.
cifs Windows CIFS is used.
nfs UNIX NFS is used.
nfs-cifs Both UNIX NFS and Windows CIFS are used.
Optional. This parameter specifies privileges to write data to the shared folder. If this
parameter is omitted, "rw" is specified.
r Privileges to read data only
rw Privileges to read and write data
Optional. This parameter specifies whether the shared folder locks the files by using the
Opportunistic locking (Oplocks) function to avoid conflicts. If this parameter is omitted,
"disable" is specified.
• When Alternate Data Streams (ADS) is used, do not set this parameter to "enable".
• This parameter can be specified only when CIFS or NFS/CIFS is used as the protocol.
enable The Oplocks function is used.
disable The Oplocks function is not used.
Optional. This parameter specifies the name of the owner of the shared folder using up to 255
characters. If this parameter is omitted, "root" is specified.
When this parameter is specified, the "-group" parameter must be set. Both parameters must
be specified.
owner
Name of the owner of the shared folder
Optional. This parameter specifies the group name of the shared folder using up to 255
characters. If this parameter is omitted, "root" is specified.
When this parameter is specified, the "-owner" parameter must be set. Both parameters must
be specified.
group
Group name of the shared folder
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
738
P2X0-1210-05ENZ0