Fujitsu Eternus DX100 S3 User Manual page 272

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-iscsi-names
When the iSCSI host identifier parameter is specified, the detailed information of the specified iSCSI host
identifier is displayed:
Host No.
Host Name
iSCSI Name iSCSI host name which corresponds to an HBA
Alias Name Alias name which corresponds to the iSCSI name
IP Address
Chap User Name
Host Response No.
Host Response Name
CmdSN Count
■ Example(s)
The following example displays the iSCSI host summary list:
"*" mark on IP Address stands for any IP addresses:
CLI> show host-iscsi-names
Host
No. Name
---- ---------------- --- ---------------- --------------------------------------- -------------------------------- -----------
1 HBA-ISCSI-001
2 HBA-ISCSI-002
3 HBA-ISCSI-003
The following example displays the iSCSI host details of the host named "HBA1":
CLI> show host-iscsi-names -host-name HBA1
Host No.
Host Name
iSCSI Name
Alias Name
IP Address
Chap User Name
Host Response No.
Host Response Name
CmdSN Count
Host number
Host nickname
IP address which corresponds to an HBA. If the IP address is not specified, the * mark is
displayed. When the IP address format is IPv4, "*(IPv4)" is displayed. When the IP
address format is IPv6, "*(IPv6)" is displayed.
CHAP user name
Assigned host response number
Assigned host response name
Number of commands that can be accepted at the same time
Host Response IP Address
No. Name
1 HP01 192.168.1.1
1 HP01 2001:DB8::8:800:200C:417A
1 HP01 *(IPv6)
1
HBA1
iqn.1991-05.com.microsoft
IQN-DXL
10.1.1.1
User01
1
HP01
180
272
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
iSCSI Name CmdSN Count
iqn.1991-05.com.microsoft 20
iqn.1993-05.com.microsoft 120
iqn.1993-05.com.microsoft Unlimited
P2X0-1210-05ENZ0