Fujitsu Eternus DX100 S3 User Manual page 573

Chapter 5 System Settings and Display
5.2 Network Management
The following figure shows how to register the certificate:
Settings state when ships
from factory.
No certificate
When registering a
self-signed certificate.
Issue self-signed certificate.
*1: Certification Signing Request
■ Non-interactive CLI command execution
Use of SSH public key authentication enables non-interactive (scriptable) CLI command execution.
Perform the following procedure to execute the CLI command interactively:
Procedure
1
Create a key pair for SSH authentication in a client.
2
Convert the created public key file into IETF format.
3
Register the public key in the ETERNUS DX.
4
Check that CLI is available in the ETERNUS DX by using the public key authentication.
5
Execute a CLI command using a here document in the SSH client.
In case of register
certificate signed by provider.
Cannot access with https
Allow https access
Certificate
(self- or provider-signed)
573
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Generate and export CSR (*1)
Send CSR to provider.
Receive signed certificate.
Register signed certificate.
End of procedure
P2X0-1210-05ENZ0