Network Settings - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display

7.5 Network Settings

7.5 Network Settings
This section describes the commands that are related to management of the NAS network connection.
The functions that control the NAS network connection are as follows:
• Displaying the NAS network interface port settings
• Configuring the NAS network interface port
• Displaying the DNS server
• Adding the DNS server
• Deleting the DNS server
• Displaying the IPv4 route of the NAS interface
• Adding the IPv4 static route of the NAS interface
• Deleting the IPv4 route of the NAS interface
• Displaying the IPv6 route of the NAS interface
• Adding the IPv6 static route of the NAS interface
• Deleting the IPv6 route of the NAS interface
770
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0