Fujitsu Eternus DX100 S3 User Manual page 189

Chapter 3 Configuration Settings and Display
3.3 Thin Provisioning Pool Management > expand thin-pro-pool
-assigned-cm
■ Example(s)
The following example expands Thin Provisioning Pool#01 by adding a RAID group (disks 001 to 004/CM#0):
CLI> expand thin-pro-pool -pool-number 01
The following example expands Thin Provisioning Pool#02 by adding a RAID group (capacity 900GB/CM#1):
CLI> expand thin-pro-pool -pool-number 02
Optional. This parameter specifies the assigned controller (CM number) of the specified RAID
group. This parameter can only be specified when "-rg-mode manual" is specified. If "auto" is
specified, the fixed controller, which is calculated automatically by the system, is assigned. If
omitted, the "auto" mode is set.
0 Controller module#0
1 Controller module#1
auto Automatically (default)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
-disks 001-004 -assigned-cm 0
-capacity 900G -assigned-cm 1
189
P2X0-1210-05ENZ0