Import Ais-Ssl-Certificate - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > import ais-ssl-certificate

import ais-ssl-certificate

This command imports and registers the SSL server certificate that is signed by the certificate provider.
■
Syntax
import ais-ssl-certificate -port {maintenance | remote | fst} -server
filename
-filename
■ Parameter
-port
-server
-user
-filename
-indicator
[-indicator {enable | disable}]
This parameter specifies which Ethernet port is used to connect to the FTP server. For further
information, refer to "1.11 Note for Specifying FTP Server" (page
maintenance
MNT port
remote RMT port
fst FST port (not supported in the ETERNUS DX100 S3/DX200 S3 or the ETERNUS
DX200F)
This parameter specifies the FTP server name in which the certificate file is to be stored. The
server name format is IPv4 standard notation (as a string in the base 256 notation d.d.d.d),
IPv6 address format or a fully qualified domain name (FQDN).
Example: -server 192.168.1.20
Example: -server fd80::abd0:223:ad
Example: -server foo.bar
server_name
FTP server name
This parameter specifies the user name that is to be used to access the FTP server. When this
parameter is specified, the command displays an FTP server password prompt.
login_user_account
User name
This parameter specifies the certificate file name.
filename
Certificate file name
Optional. This parameter specifies whether the progress indicator is displayed. If omitted, the
progress indicator is displayed.
enable Progress indicator is displayed.
disable Progress indicator is not displayed.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
server_name
597
login_user_account
-user
35).
P2X0-1210-05ENZ0