Set User - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.1 User Management > set user

set user

This command changes the information of an existing user account. A user name cannot be changed. A
currently logged in user account can be used, and any changes are enabled after the next login.
■ Syntax
set user -name
■ Parameter
-name
-role
-function
■
Example(s)
This example changes the role of the user account named "user1" to the Administrator Role:
CLI> set user -name user1 -role Admin -function enable
name role
[-role ] [-function {enable | disable}]
This parameter specifies the user name. Only one user name can be specified at the same
time.
name
User name
Optional. This parameter specifies the role. If omitted, the existing setting is not changed.
role
Total Administrator role or user-defined role
Total Administrator role
Maintainer
SecurityAdmin
AccountAdmin
StorageAdmin
Administrator
Monitor
Software
Custom role
Role that is created using the "create role" command.
Optional. This parameter specifies whether the modified user account is enabled. If this
parameter is omitted, "enable" is set.
enable The user account that is created is enabled immediately (default).
disable The user account is created but not enabled.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Maintenance operator
Security administrator
Account administrator
ETERNUS DX administrator
Total administrator
Monitor
Software
476
P2X0-1210-05ENZ0