Show Nas-Fsmntstat - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.9 File System Maintenance > show nas-fsmntstat

show nas-fsmntstat

This command displays the status of the file system management server and the status of the file system
client connecting to the management server.
■ Syntax
show nas-fsmntstat {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Output
Message
■ Example(s)
This command displays the status of the management server for volume#2 and the status information for
the client that connects the management server.
CLI> show nas-fsmntstat -volume-number 2
MountPoint /mnt/fs1
Device /dev/disk/by-id/scsi-1FUJITSU_300000370106
SV MDS host1 29000 Active
SV MDS host2 29000 Standby
SV AC host1 Normal
SV AC host2 Normal
CL AC host3 Disconnecting
CL AC host4 Disconnecting
volume-number
This parameter specifies the target NAS TPV. Only a single volume can be specified.
• Only NAS TPVs can be specified.
• If the specified volume is not mounted, this command terminates with an error.
volume-number
Volume number
volume-name
Volume name
File system information
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
|-volume-name
810
volume-name
}
P2X0-1210-05ENZ0