Show Lu-Qos-Groups - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show lu-qos-groups

show lu-qos-groups

This command displays detailed settings of the LU QoS Group.
■
Syntax
show lu-qos-groups [-lu-qos-group
■ Parameter
-lu-qos-group
-lun
■ Output
When a list of the LU QoS Groups is displayed
LU QoS Group No.
When the LU QoS Groups to display detailed information for are specified
LU QoS Group No.
LUN
Bandwidth Limit
lu_qos_group_number
Optional. This parameter specifies the LU QoS Group to display detailed information.
lu_qos_group_number
LU QoS group number
Optional. This parameter specifies which Host LUNs to display detailed information for.
When "all" is specified, the information for the LUNs with "0" (Unlimited) as the bandwidth
limit is also displayed. If omitted, the information for the LUNs is not displayed.
lun
Host LUN
all All Host LUNs
Registered LU QoS Group numbers
Registered LU QoS Group numbers
Host LUN
Bandwidth limit (upper limit performance value) that is set to the LU QoS Group
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
lun
] [-lun |all]
372
P2X0-1210-05ENZ0