Stop Balancing-Thin-Pro-Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > stop balancing-thin-pro-volume

stop balancing-thin-pro-volume

This command stops evenly relocating the TPVs among RAID groups. Specify the TPV that is being balanced.
■
Syntax
stop balancing-thin-pro-volume {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Example(s)
The following example stops balancing TPV01 and TPV02:
CLI> stop balancing-thin-pro-volume -volume-name TPV01,TPV02
This parameter specifies the TPV to stop balancing. One or more parameters can be specified at
the same time. For details, refer to
volume_numbers
Volume number
volume_names
Volume name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_numbers
| -volume-name
"1.2.10 Volume Syntax" (page
141
volume_names
}
26).
P2X0-1210-05ENZ0