Fujitsu Eternus DX100 S3 User Manual page 753

Chapter 7 NAS Function Setting and Display
7.2 Network Interface > create nas-interface
-ip
-netmask
-gateway
-link-local-ip
Optional. This parameter specifies the IPv4 address of the NAS interface.
• An address that conflicts with that of another NAS interface cannot be specified.
• The "-netmask" parameter must be set.
ip_address
IPv4 address of the NAS interface
Example: 192.168.0.100
Optional. This parameter specifies the subnet mask of the IPv4 address between 192.0.0.0 and
255.255.255.252.
The "-ip" parameter must be set.
netmask
Subnet mask of IPv4 address (192.0.0.0 to 255.255.255.252)
Optional. This parameter specifies the IPv4 gateway address.
• The address of a different subnet cannot be specified.
• The "-ip" parameter must be set.
gateway_address
IPv4 gateway address.
Example: 192.168.0.1
Optional. This parameter specifies the IPv6 link local address of the NAS interface.
• An address that conflicts with that of another NAS interface cannot be specified.
• Only a link local address can be specified.
link_local_address
IPv6 link local address of the NAS interface
Example: fe80::0123:4567:89ab:cdef
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
753
P2X0-1210-05ENZ0