Set Snmp-Manager - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > set snmp-manager

set snmp-manager

This command sets an IP address to the snmp-manager setting.
This command is not available when the set SNMP manager setting is already used for a SNMP community or
SNMP trap.
■ Syntax
set snmp-manager -manager-number
■ Parameter
-manager-number
-ip-address This parameter specifies the SNMP manager IP address. To specify the SNMP manager IP
■
Example(s)
The following example sets SNMP manager number 3 to IP address 192.168.0.254:
CLI> set snmp-manager -manager-number 3 -ip-address 192.168.0.254
manager-number
This parameter specifies the SNMP manager settings number. This number can be confirmed
by using the "show snmp-manager" command.
manager-number
Settings number
address, use IPv4 standard notation (a base 256 "d.d.d.d" string) or the IPv6 format. The SNMP
manager IP address cannot be specified with a fully qualified domain name (FQDN). The types
of IPv6 addresses that can be specified are global addresses (including 6to4 addresses), link
local addresses, and unique local addresses.
Example: -ip-address 192.168.1.20
Example: -ip-address fe80::1b:332f:d0
ip_address
IP address
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
-ip-address ip_address
514
P2X0-1210-05ENZ0