Fujitsu Eternus DX100 S3 User Manual page 268

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-sas-address
■ Example(s)
The following example changes the host named "HBA1", assigning it host response number "2":
CLI> set host-sas-address -host-name HBA1 -host-response-number 2
The following example changes the host response definition of all the hosts with consecutively numbered
identifiers #1 to #10 at the same time:
CLI> set host-sas-address -host-number 1-10 -host-response-number 5
The following example changes the host named "HBA1", assigning it the new alias "HBA123":
CLI> set host-sas-address -host-name HBA1 -name HBA123
268
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0