Show Snmp-View - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > show snmp-view

show snmp-view

This command displays a list of the registered SNMP MIB views. If MIB view names are specified, the
command displays the associated sub-trees.
■ Syntax
show snmp-view [-view
■ Parameter
-view
■
Output
When the parameter is omitted:
xxxxxxxx
"
When an SNMP MIB view name is specified:
View-name MIB view name
Subtree
■ Example(s)
The following example displays a list of all the registered MIB view names:
CLI> show snmp-view
"ViewALL"
"View-mib2"
"View-exmib"
"xview4"
"xview5"
The following example displays a sub-tree list of the MIB view named "View-exmib":
CLI> show snmp-view -view View-exmib
View-name : "View-exmib"
Subtree1 : [Include] 1.3.6.1.4.1.211.1.21.1
view_names
]
Optional. This parameter specifies the MIB view name to display sub-trees. Two or more MIB
views can be specified by both a combination of a part of name and asterisk (*), a wildcard at
the same time and just scribing names. The wildcard rules are shown below:
Examples are shown below.
*: Correct
part-of-view-name*: Correct
*part-of-view-name: Incorrect
view_names
MIB view name
" MIB view name
Sub-tree information (include/exclude information) and OID format sub-tree
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
516
P2X0-1210-05ENZ0