Fujitsu Eternus DX100 S3 User Manual page 588

Chapter 5 System Settings and Display
5.2 Network Management > set ais-connect
-server-certification
-proxy-server
-proxy-port-number
-proxy-type Optional. This parameter specifies the type of communication with the proxy server. This
-user-name Optional. This parameter specifies the user name for proxy server authentication. Up to 32
Optional. This parameter specifies whether to enable server certification for SSL/TLS communi-
cation between the ETERNUS DX and the AIS Connect server. This parameter cannot be speci-
fied when the AIS Connect function is disabled. If omitted, the existing setting is not changed.
enabled Server certification is enabled (default).
disable Server certification is disabled.
Optional. This parameter specifies the proxy server. Only one proxy server can be specified at
the same time. The server name format should be either IPv4 standard notation (a base 256
"d.d.d.d" string) or a fully qualified domain name (FQDN). Up to 63 alphanumeric characters
can be specified. When a proxy server is not used, specify a null character (""). If consecutive
double quotations ("") are specified, the proxy port number, the proxy type, and the user name
are initialized. When the AIS Connect function is disabled, only a null character ("") can be
specified. If omitted, the existing setting is not changed.
Example: -proxy-server 192.168.1.20
Example: -proxy-server foo.bar
proxy-server Proxy server
"" A proxy server is not used or the AIS Connect function is disabled.
Optional. This parameter specifies the proxy server port number. Specify the port number
within 1 to 5 digits. The port number cannot be set above 65535. This parameter cannot be
specified when the AIS Connect function is disabled or the proxy server is not set. If omitted,
the existing setting is not changed.
proxy-port-number
Proxy server port number
parameter cannot be specified when the AIS Connect function is disabled or the proxy server is
not set. If omitted, the existing setting is not changed.
http Basic/NTLM HTTP authentication
socks SOCKSv5 authentication
characters can be specified. This parameter cannot be specified when the AIS Connect function
is disabled or the proxy server is not set. To delete the user name for proxy server authentica-
tion that is already set, specify a null character (""). If omitted, the existing setting is not
changed.
user-name
User name for proxy server authentication
"" The user name for proxy server authentication is deleted.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
588
P2X0-1210-05ENZ0