Fujitsu Eternus DX100 S3 User Manual page 384

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-lu-qos
-bandwidth-limit
-host-type
-host-number
or
-host-name
Optional. This parameter specifies the bandwidth limit (upper limit performance value) for
Port QoS or Host QoS. Any value between 0 (unlimited) and 15 (Max) can be specified. When
multiple values are specified, the number of values that are specified for this parameter must
be the same as the "-port" parameter or the "-host-number" parameter.
bandwidth-limits
Bandwidth limit (upper limit performance value) for Port QoS or Host QoS (0 –
15)
Port QoS
0 Unlimited
1 27,000 IOPS (1,000 MB/s)
2 21,000 IOPS (850 MB/s)
3 15,000 IOPS (700 MB/s)
4 10,020 IOPS (600 MB/s)
5 8,040 IOPS (500 MB/s)
6 6,000 IOPS (400 MB/s)
7 5,040 IOPS (300 MB/s)
8 4,020 IOPS (250 MB/s)
9 3,000 IOPS (200 MB/s)
10 2,040 IOPS (160 MB/s)
11 1,020 IOPS (125 MB/s)
12 720 IOPS (90 MB/s)
13 480 IOPS (60 MB/s)
14 240 IOPS (30 MB/s)
15 120 IOPS (15 MB/s)
This parameter specifies the type of host to set Host QoS for. The host can be specified by using
the "-host-number" or "-host-name" parameter.
fc FC/FCoE
iscsi iSCSI
sas SAS
This parameter specifies which host to set Host QoS or LU QoS for. refer to
(page 27).
host_numbers
Host number
host_names
Host name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
384
Host QoS
Unlimited
15,000 IOPS (800 MB/s)
12,600 IOPS (700 MB/s)
10,020 IOPS (600 MB/s)
7,500 IOPS (500 MB/s)
5,040 IOPS (400 MB/s)
3,000 IOPS (300 MB/s)
1,020 IOPS (200 MB/s)
780 IOPS (100 MB/s)
600 IOPS (70 MB/s)
420 IOPS (40 MB/s)
300 IOPS (25 MB/s)
240 IOPS (20 MB/s)
180 IOPS (15 MB/s)
120 IOPS (10 MB/s)
60 IOPS (5 MB/s)
"1.2.11 Host Syntax"
P2X0-1210-05ENZ0