Fujitsu Eternus DX100 S3 User Manual page 74

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > show raid-group-progress
Expanding Progress
■ Example(s)
The following example displays a progress list of all the RAID groups:
CLI> show raid-group-progress
RAID Group
No. Name
--- ---------------- ------------------------------- -------- ------------------- -------------- ---------
0 RAIDGROUP001
1 RAIDGROUP012
2 RAIDGROUP013
3 RAIDGROUP014
The following example displays only the progress status of the RAID group #1:
CLI> show raid-group-progress -rg-number 1
RAID Group
No. Name
--- ---------------- ------------------------------- -------- ------------------- -------------- ---------
1 RAIDGROUP012
The following example displays the progress status of the RAID group named "RAIDGROUP001" and
"RAIDGROUP012":
CLI> show raid-group-progress -rg-name RAIDGROUP001,RAIDGROUP012
RAID Group
No. Name
--- ---------------- ------------------------------- -------- ------------------- -------------- ---------
0 RAIDGROUP001
1 RAIDGROUP012
Remaining size
Remaining capacity of recovery
-
X
MB
Progress status of expanding RAID groups (Logical Device Expansion)
Status
Copyback
Available
Available
SED Locked
Status
Available
Status
Copyback
Available
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Formatting is not performed or is complete.
Remaining capacity (rounded up to the nearest whole number)
X: decimal number
Rebuild/Copyback
Progress Estimated time left Remaining size Progress
87% 12h 59min
- -
87% Less than 1min
0% 30days or more
Rebuild/Copyback
Progress Estimated time left Remaining size Progress
- -
Rebuild/Copyback
Progress Estimated time left Remaining size Progress
87% 12h 59min
- -
74
Expanding
1024MB -
- 19%
16MB -
134217728MB -
Expanding
- 19%
Expanding
1024MB -
- 19%
P2X0-1210-05ENZ0