Show Balancing-Flexible-Tier-Pools - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.4 Flexible Tier Management > show balancing-flexible-tier-pools

show balancing-flexible-tier-pools

This command displays balancing information for the Flexible Tier Pools (FTRPs) that are registered in the
ETERNUS DX. When an FTRP number or an FTRP name is specified, this command displays balancing informa-
tion for the specified FTRP and the Flexible Tier Sub Pools (FTSPs) that are registered in this FTRP. When the
FTRP number or the FTRP name is omitted, this command displays the balancing information of all the FTRPs
that are registered in the ETERNUS DX.
■ Syntax
show balancing-flexible-tier-pools [-ftrp-number
■
Parameter
-ftrp-number
or
-ftrp-name
■ Output
When the parameter is omitted:
Flexible Tier Pool
Balancing Level
Balancing Process
Optional. This parameter specifies which FTRP to display the balancing information for. Only
one FTRP can be specified at the same time. If omitted, the balancing information of all the
FTRPs that are registered in the ETERNUS DX is displayed.
For details, refer to "1.2.7 Flexible Tier Pool Syntax" (page
ftrp_number
FTRP number
ftrp_name
FTRP name
FTRP identifiers
No. FTRP number
Name FTRP name
Balancing level (High/Medium/Low/-) of each FTRP (A hyphen (-) is displayed
when an Not Ready error or a Subsystem Down error occurs in the ETERNUS DX)
FTRP balancing progress
Status Balancing status (Active/Error/-) for the FTRP (A hyphen (-) is
displayed when balancing is not being performed)
Progress(%) Balancing progress for the FTRP (A hyphen (-) is displayed when
balancing is not being performed)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
ftrp_number
| -ftrp-name
213
ftrp_name
]
24).
P2X0-1210-05ENZ0