Show Encryption - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.3 System Settings > show encryption

show encryption

This command displays the status of the encryption mode.
Encryption-related functions may not be available for some user environments.
■
Syntax
show encryption
■ Parameter
No parameters.
■ Output
Encryption Mode
■ Example(s)
The following example displays whether the encryption mode is enabled or disabled:
CLI> show encryption
Encryption Mode [Fujitsu]
CLI> show encryption
Encryption Mode [AES]
CLI> show encryption
Encryption Mode [Disable]
Encryption mode
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
612
P2X0-1210-05ENZ0