Show Raid-Groups - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > show raid-groups

show raid-groups

This command displays a summary list of all the RAID groups or the details of a specified RAID group(s).
■
Syntax
show raid-groups [-rg-number
■ Parameter
-rg-number
or
-rg-name
■ Output
RAID Group RAID group identifiers
RAID Level
Consist of Fast Recovery
Assigned CM
Status
Total Capacity (MB)
Free Capacity (MB)
Stripe Depth (Unit: KB)
Key Group
rg_numbers
Optional. This parameter specifies RAID group identifiers. One or more RAID groups can be
specified. For details, refer to
identifier is omitted, a summary list of all the RAID groups is displayed.
rg_numbers
RAID group number
rg_names
RAID group name
No. RAID group number
Name RAID group name
RAID level
Disks configured for the Fast Recovery RAID Group.
(This information is displayed for RAID groups with RAID6-FR RAID level. A hyphen (-) is dis-
played for other RAID levels.)
The disk configuration, the number of configurations, and the number of HS disks for RAID6
are displayed.
Example: (3D+2P)x2+1HS
Assigned CM number (CM number to control a RAID group)
RAID group status
Total capacity (Unit: MB)
Free capacity (Unit: MB)
Stripe Depth (Unit: KB) (Only when viewing details)
Usage status of the key group (Only when viewing details)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
rg_names
| -rg-name ]
"1.2.9 RAID Group Syntax" (page
70
25). If the RAID group
P2X0-1210-05ENZ0