Show Sed-Key-Servers - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.3 System Settings > show sed-key-servers

show sed-key-servers

This command displays the key server.
■
Syntax
show sed-key-servers [-server-id
■ Parameter
-server-id
■ Output
Server ID
Server
Port Number
Port
■ Example(s)
The following example displays the key server information:
CLI> show sed-key-servers
Server ID
Server
Port Number
Port
Server ID
Server
Port Number
Port
The following example displays the key server information when the server ID is 1:
CLI> show sed-key-servers -server-id 1
Server ID
Server
Port Number
Port
server_id
Optional. This parameter specifies the key server IDs that are to be displayed. 1 or 2 can be
specified. Multiple key server IDs can be specified at the same time. If this parameter is
omitted, all of the server information is displayed.
server_id
Key server ID
Key server ID
FQDN or IP address (IPv4 or IPv6) of the key server
Port number of the key server
Indicates which LAN port is used.
1
10.21.134.198
5696
RMT
2
-
5696
MNT
1
10.21.134.198
5696
RMT
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
]
639
P2X0-1210-05ENZ0