Fujitsu Eternus DX100 S3 User Manual page 439

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > show rec-path
The following example displays the path information details for the specified storage system. In this case,
iSCSI-RA (for connecting older models) is used:
CLI> show rec-path -remote-boxid "00DXL#########ET06F21AUABCPJ000000######"
Storage Information
Local Box ID (Current Storage System) 00DXL#########ET06F21AUABCPJ000001######
Remote Box ID
Line Information
Path Type
Effective Line Speed
Round Trip Time
Current Multiplicity
Recommended Multiplicity
Priority Level
Copy Schedule Mode
Path Information (to Remote Storage System)
Local Port
---------------- ----------------- -----------------------------------------
CM#0 CA#2 Port#1 Error [B
CM#1 CA#1 Port#0 Error [T
CA#2 Port#0 Normal
CA#2 Port#0 Error [I C T S
CA#2 Port#1 Normal
Error detail description(s)
B: The resolution settings are different between the local and remote devices.
T: The error occurs in the FC-RA port or iSCSI-RA port on the remote device.
C: The error occurs in the cable.
S: The error occurs in the switch or switch settings.
I: The error occurs in the FC-RA port or iSCSI-RA port on the local device.
00DXL#########ET06F21AUABCPJ000000######
Switched
10 (Mbit/s)
12 (ms)
Auto
3
-
Destination RAID Group balancing
Status Remote Port WWN / iSCSI Name (IP Address)
] irq.2010-10.com (FE80::290:CCFF:FEA4:3A49)
] irq.2010-11.com (2001:DB8::8:800:200C:417A)
irq.2010-12.com (192.168.2.64)
] irq.2011-01.com
irq.2010-12.com.fujitsu:storage-system.eternus-dx400:00040093405060808091 (192.168.2.66)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
(192.168.2.65)
439
P2X0-1210-05ENZ0