Fujitsu Eternus DX100 S3 User Manual page 549

Chapter 5 System Settings and Display
5.2 Network Management > set email-notification
-server
-authentication
-user
-from
-to1
-to2
-to3
-to4
-to5
Optional. This parameter specifies the SMTP server address. Up to 64 letters can be specified.
The server name format is IPv4 standard notation (a base 256 "d.d.d.d" string), IPv6 address
format, or a fully qualified domain name. The types of IPv6 addresses that can be specified are
global addresses (including 6to4 addresses), link local addresses, and unique local addresses.
If omitted, the existing setting is not changed.
Example: -server 192.168.1.20
Example: -server fd80::abd0:223:ad
Example: -server foo.bar
smtp_server
SMTP server address
Optional. This parameter specifies the authentication method of the SMTP server. If omitted,
the existing setting is not changed.
none The system connects to the SMTP server without authentication.
auto The system connects to the SMTP server using AUTH SMTP authentication and
automatically selects the appropriate authentication method from "cram-md5",
"plain" or "login".
cram-md5 The system connects to the SMTP server using AUTH SMTP authentication and
uses "cram-md5" as the authentication method.
plain The system connects to the SMTP server using AUTH SMTP authentication and
uses "plain" as the authentication method.
login The system connects to the SMTP server using AUTH SMTP authentication and
uses "login" as the authentication method.
Optional. This parameter specifies the user account name to connect to the SMTP server using
AUTH SMTP authentication. This command displays a password prompt. When "-authentication
none" is specified, this parameter is unnecessary. If omitted, the existing setting is not
changed.
user_name
User account name
Optional. This parameter specifies the "from address" field of E-mail sent from the system. If
omitted, the existing setting is not changed.
mail_address
Sender email address
Optional. This parameter specifies up to 5 e-mail addresses sent from the system. If any
parameter is omitted, the corresponding value is not changed.
To delete an address, specify a null character ("").
Example: -to2 ""
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
549
P2X0-1210-05ENZ0