Set Advanced-Copy-License - Fujitsu Eternus DX100 S3 User Manual

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > set advanced-copy-license

set advanced-copy-license

This command registers an Advanced Copy license. There are three types of Advanced Copy licenses: a
"legitimate version", a "trial version", and a "free" version". The "free" license is available only for the ETERNUS
DX100 S3/DX200 S3 and the ETERNUS DX200F. If the "legitimate version" license is registered in an ETERNUS
DX, when trying to register a "legitimate version" license with a lower software level than the already
registered license, an error occurs. The trial period of an already registered trial version license can be
changed only once by registering another trial version license. If a second attempt is made, an error occurs. In
addition, when a trial version license key is registered again, the trial period may be shortened due to the
valid period of the license key.
■ Syntax
set advanced-copy-license {-key
■ Parameter
-key
-type
■ Example(s)
The following example registers an Advanced Copy license:
CLI> set advanced-copy-license -key 1928569802345721
The following example registers a "free" Advanced Copy license:
CLI> set advanced-copy-license -type free
key
| -type free}
This parameter specifies the Advanced Copy license key. The license key is 16 letters (fixed).
For the "free" version license, specify the "-type" parameter.
key
Advanced Copy license key
This parameter specifies the "free" version Advanced Copy license. The "free" version license
does not require a license key.
free Free version license (only for the ETERNUS DX100 S3/DX200 S3 and the ETERNUS
DX200F)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
401
P2X0-1210-05ENZ0