Start Nas-Fsck - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.10 NAS Function Restoration > start nas-fsck

start nas-fsck

This command performs an integrity check of the file system. To review the check results, use the "show nas-
fsck" command.
■ Syntax
start nas-fsck -mode {report|check|repair|force-repair}
{-volume-number
■ Parameter
-mode
-volume-number
or
-volume-name
■ Example(s)
This command checks NAS TPV#1 with "check" mode.
CLI> start nas-fsck -volume-number 1 -mode check
This command forcibly checks NAS_TPV (NAS Backup TPV) with "repair" mode.
CLI> start nas-fsck -volume-name NAS_TPV -mode repair
volume-number |-volume-name
This parameter specifies the integrity check mode.
report Performs a check. Does not repair inconsistencies.
check Performs a check. Does not repair severe inconsistencies.
repair Performs checks as well as repairs inconsistencies.
force-repair Performs checks as well as repairs inconsistencies without using the update log.
This parameter specifies the target NAS TPV. Only a single volume can be specified.
• Only NAS TPVs can be specified.
• Unmount the target volume in advance.
volume-number
Volume number
volume-name
Volume name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume-name }
817
P2X0-1210-05ENZ0