Fujitsu Eternus DX100 S3 User Manual page 629

Chapter 5 System Settings and Display
5.3 System Settings > set syslog-notification
-server1-port
-server2-function
-server2
-server2-port-number
-server2-port
■ Example(s)
The following example sets the syslog server:
CLI> set syslog-notification -server1-function rfc3164 -server1 10.21.134.198 -server1-port-number 514 -
server1-port maintenance -server2-function rfc5424 -server2 10.17.80.6 -server2-port-number 517 -server2-
lan-port remote
Optional. This parameter specifies syslog server 1's LAN port. If this parameter is omitted, this
setting is not changed.
maintenance
MNT port
remote RMT port
Optional. This parameter specifies whether to enable syslog server 2. If this parameter is
omitted, this setting is not changed.
disable Syslog server 2 is disabled.
rfc3164 Syslog server 2 is enabled and uses message format based on RFC3164.
rfc5424 Syslog server 2 is enabled and uses message format based on RFC5424.
Optional. This parameter specifies syslog server 2. Only one server can be specified. The server
name format should be IPv4 standard notation (a base 256 "d.d.d.d" string), IPv6 address
format, or a fully qualified domain name (FQDN). The types of IPv6 addresses that can be
specified are global addresses (including 6to4 addresses), link local addresses, and unique
local addresses. Up to 63 alphanumeric characters can be specified. If this parameter is
omitted, this setting is not changed.
Example: -server2 192.168.1.20
Example: -server2 fd80::abd0:223:ad
Example: -server2 foo.bar
syslog-server2
Server name of syslog server 2
Optional. This parameter specifies syslog server 2's UDP port number for the syslog protocol.
Specify the port number within 1 to 5 digits. The port number cannot be set above 65535. If
omitted, the setting is not changed. The default value is 514.
port_number
Syslog server 2's UDP port number
Optional. This parameter specifies syslog server 2's LAN port. If this parameter is omitted, this
setting is not changed.
maintenance
MNT port
remote RMT port
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
629
P2X0-1210-05ENZ0