Fujitsu Eternus DX100 S3 User Manual page 581

Chapter 5 System Settings and Display
5.2 Network Management > export ssl-certificate-request
-subject-alt-name
-indicator
■
Example(s)
The following example generates and exports the CSR and the server key:
CLI> export ssl-certificate-request -port maintenance -server ftp.example.com -user tornado -key-length
2048 -country-name JP -state-province-name Nagano -locality-name Nagano -organization-name FJL -organiza-
tion-unit-name Eternus -common-name Eternus0001.example.com
Password :
exporting ./server.csr to ftp.example.com
Password :
exporting ./server.key to ftp.example.com
complete.
Optional. This parameter specifies the IP address or domain name that can access HTTPS for
the MNT port or the RMT port. To specify the SNMP manager IP address, use IPv4 standard
notation (a base 256 "d.d.d.d" string), the IPv6 address format, or fully qualified domain name
(FQDN). One or more FQDNs or IP addresses can be specified. The string length of all the
FQDNs or IP addresses with this parameter delimiters should be within 511bytes.
Example:
foo.var.com  (11bytes) Correct
foo.var.com, 192.168.1.1  (11 +1 +11bytes) Correct
jugemujugem...co.jp  (511bytes) Correct
jugemujugemu...co.jp  (512bytes) Incorrect
jugemujugem...co.jp, foo.var.com  (511 +1 +11bytes) Incorrect
altname1,alitname2...
IP address or domain name that can access HTTPS
Optional. This parameter specifies whether the progress indicator is displayed. If omitted, the
progress indicator is displayed.
enable Progress indicator is displayed.
disable Progress indicator is not displayed.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
581
P2X0-1210-05ENZ0