Set Qos-Mode - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set qos-mode

set qos-mode

This command sets up the QoS function and the QoS performance flexibility function.
■
Syntax
set qos-mode [-mode {enable|disable}] [-flexible-mode {enable|disable}]
■ Parameter
-mode
-flexible-mode
■ Example(s)
The following example enables the QoS function:
CLI> set qos-mode -mode enable
The following example disables the QoS function:
CLI> set qos-mode -mode disable
The following example enables the QoS function and the QoS performance flexibility function:
CLI> set qos-mode -mode enable -flexible-mode enable
The following example disables the QoS performance flexibility function:
CLI> set qos-mode -flexible-mode disable
Optional. This parameter specifies whether to enable or disable the QoS function. When "dis-
able" is specified, the QoS performance flexibility function is also disabled.
enable This parameter enables the QoS function.
disable This parameter disables the QoS function.
Optional. This parameter specifies whether to enable or disable the QoS performance flexibility
function. This parameter can only be specified when "enable" is specified for the "-mode"
parameter or the QoS function is already enabled.
enable This parameter enables the QoS performance flexibility function.
disable This parameter disables the QoS performance flexibility function.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
371
P2X0-1210-05ENZ0