Show Reservation - Fujitsu Eternus DX100 S3 User Manual

Chapter 6 Information Settings and Display
6.4 Utility > show reservation

show reservation

This command displays the reservation status of the volumes.
■
Syntax
show reservation [-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Output
When volume identifiers are omitted
Volume
LUN
Port
Registrant Count
Reservation Type
Persistent
volume_numbers
This parameter specifies the volume identifiers to be released. One or more volumes can be
specified at the same time. For details, refer to
volume_numbers
Volume number
volume_names
Volume name
Volume identifiers
No. Volume number
Name Volume name
Logical unit number associated with the target volume
When Host Affinity Mode is disabled, the host interface port number assigning to the
host mapping is displayed
LUN Group LUN group identifiers
(this information appears when the Host Affinity Mode is enabled).
No. LUN group number that belongs to the volume
Name LUN group name that belongs to the volume
Number of reservation key registrations
Type of the persistent reservation
Status of the persistent reservation
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
| -volume-name
"1.2.10 Volume Syntax" (page
723
volume_names
]
26).
P2X0-1210-05ENZ0