Show Volume-Progress - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > show volume-progress

show volume-progress

This command displays the progress of formatting, migration (RAID Migration), encryption, balancing, and
Zero Reclamation for volumes.
This command is also used to display the progress of Flexible Tier Volume (FTV) processes.
Encryption-related functions may not be available for some user environments.
■ Syntax
show volume-progress [ -volume-number
■ Parameter
-volume-number
or
-volume-name
■ Output
Volume
Status
Formatting
Optional. This parameter specifies the volume identifiers. One or more parameters can be
specified at the same time. If the volume identifier is omitted, the progress status of all the
volumes is displayed. For details, refer to
volume_numbers
Volume number
volume_names
Volume name
Volume identifiers
No. Volume number
Name Alias name of volume
Volume status
Information on the formatting progress
Progress Progress
A value from 0% to 99% or "-" is displayed.
("-" indicates that formatting is not performed or is complete)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_numbers
| -volume-name
"1.2.10 Volume Syntax" (page
114
volume_names
]
26).
P2X0-1210-05ENZ0