Show Odx-Mode - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > show odx-mode

show odx-mode

This command displays the operation mode for the Offloaded Data Transfer function.
■
Syntax
show odx-mode
■ Parameter
No parameters.
■ Output
Offloaded Data Transfer Mode
■ Example(s)
The following example displays the operation mode for the Offloaded Data Transfer function:
CLI> show odx-mode
Offloaded Data Transfer Mode [Enable]
Operation mode for the Offloaded Data Transfer function (Disable: disabled, Enable: enabled)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
160
P2X0-1210-05ENZ0